LED mirrors for a small bathroom, sized in millimetres
LED bathroom guide
In a small bathroom, size the mirror to the vanity rather than the wall, and centre it on the basin. Ours start at 600 mm wide, and the round one is 800 mm across. All of them plug into a standard power point, offer three light tones and have a built-in demister, with no separate demister control. That's the short version. The rest is your vanity, your wall and where the shower screen sits.
Measure the vanity, not the wall
A bathroom mirror takes its size from the vanity underneath it. Keep the glass inside the vanity's width, centre it on the basin rather than the wall, and the whole wall settles before you've hung anything else. Basins are hardly ever centred in a room, and it's the basin your eye reads.
Over a 900 mm vanity, the Elena LED at 900 mm high and 600 mm wide leaves 150 mm of clear tile each side. That's the shape of it, not a rule: a wall with a return or a tall cabinet beside it wants its own measure. If the vanity is narrower again, the Jasmine LED is 800 mm across and uses a tight wall better than a rectangle can, because there's no corner to run out of room in.
A wider vanity, or a wall that runs long
The Vittoria LED is 1100 mm high and 900 mm wide, so it stands taller than it is wide. It's the one for a vanity around a metre, where the Elena starts to look small against the bench.
Then there's the bathroom wall that runs wider than it is tall. The Danielle LED is the mirror we make for exactly that, 1000 mm high and 1500 mm wide, landscape, and the only one in the range that way round. At 1500 mm across it needs a clear run of wall wider than that, so it's the measurement to take before anything else. Its drawing is worth a look before you order too, because most people picture it standing tall and it doesn't.
Three tones, all on one touch point
Every LED mirror we sell holds the same three tones: 3000K, 4500K and 6500K, with a CRI above 80 on all three. There's no switch on the wall and no remote to lose. You tap the glass to turn it on, tap again to move to the next tone, and hold to dim it. Every LED mirror in the range has a small white standby light that stays on at the touch button when the mirror is off, and that light can't be switched off. The touch-control circle is blue when the backlight is on.
| Tone | What the light looks like |
|---|---|
| 3000K | Warm white, near enough to a warm globe |
| 4500K | Neutral white, neither warm nor cool |
| 6500K | Cool white, the closest of the three to midday daylight |
Most people find their tone in the first week and leave it there. The other two are for the mornings that aren't like the others: a dark winter start, or a room that's already full of daylight and doesn't want any more warmth in it.
A demister behind the glass
The demister is a pad behind the glass that warms the surface to help reduce fogging. There is no separate demister control.
Check the operating instructions supplied with your mirror before use.
Where it can go
Two placement rules, and they're both short. The mirror goes outside the shower screen, and it doesn't go over a bath. Above the vanity is where it earns its keep anyway, because that's where you stand and usually where the power point is.
It plugs in
Ours plug into a standard power point. The lead comes out of the back with an Australian plug already fitted, which you can see on the back view of any of the drawings. For most bathrooms that makes an LED mirror a question of a power point within reach, not a renovation.
If you'd rather the lead wasn't there, hardwiring is optional. Use a licensed electrician for this, or for a new or moved power point. Keep the invoice if you go that way, since a hardwired warranty claim asks for it.
What you're lifting
Plan enough help to keep the mirror supported and under control while lifting and positioning it. All four hang on heavy duty mounting brackets bonded to the back, and the drawing on each product page gives the bracket positions in millimetres, so the wall can be marked before the mirror is out of its carton.
If the room isn't that small
Not every bathroom is a small one. If yours has a full wall free, the Sienna LED arch is 1800 mm high and 850 mm wide, with the same three tones and demister. The Sienna LED arch has a removable stand. This model hangs on the wall, or stands on the floor and fixes to the wall with its top bracket.
Every LED mirror in this guide, in millimetres
- Jasmine LED, round800 across x 25 D
- Elena LED900 H x 600 W x 25 D
- Vittoria LED1100 H x 900 W x 25 D
- Danielle LED, landscape1000 H x 1500 W x 25 D
- Sienna LED arch1800 H x 850 W x 25 D
All five are backlit, 3000K, 4500K and 6500K on a touch, CRI above 80, with a built-in demister, no separate demister control and an Australian plug fitted to the lead.
Browse the LED range with every size listed in millimetres, and check availability on the product page. In-stock mirrors are dispatched from Melbourne within 2 business days. Delivery is on us for any mirror, anywhere in Australia. If you're still working out sizes, the mirror sizing guide covers the rest of the house, and LED mirrors explained goes further into the light and the demister.